Ceramizer CM-4T

Ceramizer CM-4T is specially developed for small 4-stroke combustion engines in scooters and quads. The formula is tuned to the tight tolerances of small scooter engines (50–400 cc) and differs from Ceramizer CM, which is intended for motorcycle engines. The product simultaneously protects the engine and gearbox. The ceramic-metallic particles penetrate all friction surfaces, fill micro-damage and form a hard protective layer. Regeneration takes place entirely during normal operation — no disassembly required. The protective layer forms during the first ~1,500 km and remains active up to 30,000 km. The product is compatible with all 4-stroke scooter oils and safe for wet-clutch systems.

Ceramizer CM-4T works in three phases: During the first 500 km, the ceramic-metallic particles spread through the oil and reach all friction surfaces. Between 500 and 1,500 km, particles adhere to the most worn surfaces, filling scratches and micro-cavities. After 1,500 km, the ceramic protective layer is fully formed — the engine runs quieter, uses less fuel and oil.

1. 1Apply with a warm engine (after at least 5 minutes of riding)
2. 2Add to engine oil through the oil filler cap
3. 3Dosage per table (based on engine displacement)
4. 4For mileage >30,000 km: add one extra dose
5. 5Ride at least 1,500 km without changing oil after application
6. 6Protection active up to 30,000 km — then repeat

Number of dispensers — based on engine/oil volume and mileage.

× = number of dispensers

Above 600 cc: use Ceramizer CS. One dispenser = 4 g.