EAN: 5907439901463
Engine Flush POWER
Engine flushing agent — use before oil change
Powerful engine internal cleaner. Removes sludge, oil deposits and carbon before oil change. Recommended before Ceramizer CS treatment.
Product description
Engine Flush POWER is a powerful engine internal cleaner used directly before an oil change. It removes sludge, oil deposits, varnish and other contaminants that accumulate over the years inside the engine. The formula contains active cleaning agents that work quickly (~10 minutes at idle), free from chlorinated hydrocarbons — no toxic fumes and safe for seals. The cleaning agents dissolve carbon without flaking, so oil channels are not blocked. Particularly recommended before Ceramizer CS treatment: a clean engine absorbs ceramic-metallic particles better and faster, achieving maximum regenerative effect.
How does it work?
The active agents in Engine Flush POWER penetrate all oil channels, piston ring grooves, camshaft bearings and the oil sump. They dissolve sludge and deposits not removed by normal oil. When idling, the product circulates through the entire system and carries all dissolved contamination to the oil filter. After draining the oil, all impurities are removed with the fluid.
How to use
Tip: best results are achieved by adding the product during a fresh oil change.
- 1Add to OLD engine oil — before oil change
- 2Warm engine to operating temperature (~90°C)
- 3Let idle for 10–15 minutes
- 4Drain oil and replace oil filter
- 5Add new engine oil — ideal moment for Ceramizer CS
Frequently Asked Questions
Benefits
- Removes sludge, varnish and carbon deposits
- Cleans oil channels, ring grooves and bearings
- Free from chlorinated hydrocarbons — safe for engine
- Fast acting (10 minutes idling sufficient)
- Safe for all seals and rubber components
- Optimally prepares engine for ceramization
